Autojack 9L Oil Water Suction Extraction Pump Fluid Vacuum Transfer Hand Operating

• The oil suction pump hand pump adopts an ergonomic handle, which can complete the oil pumping independently. Durable pedals that secure the tank while operating. It can be used to extract engine oil, and brake fluid, lubricate oil from machines and cars, extracts water from the fish tank, etc.


• Extract oil from your vehicle without using specialized tools from your car, motorcycle, scooter, boat, quad bike, truck, boat, forklift, generator, tractor, and transfer diesel to Cars, The fuel transfer pump can be used for everything from engine oil, brake fluid lubricants, low viscosity fluids, motor oils, brake fluids, machinery, automotive lubricants, fish tank water, and Extraction in most fluid extraction applications.


• Fluid extractor 9.0 liter PE oil tank, fast, clean, and efficient, the pump is simple to operate, can easily remove the liquid, easy to use. All you need to do is put the water inlet and outlet hoses in place, a process so easy you can usually do it yourself to keep your engine running smoothly.


• The transparent hose can visually check the fluid extraction, the car oil pump comes with a 3PP hose (Ø4MM Ø6MM Ø10MM) and copper pipe (Ø4MM).


• For safety reasons, please do not use this tool to extract or preserve dangerous chemicals, alkaline liquids, and solvents, and do not use this tool to extract or preserve petroleum or flammable liquids. Do not discard improper processing tools, etc. Do not disassemble tools, modify or modify for any purpose, only for this function. Do not expose the product and piping to high temperature, rain, snow, direct sunlight, etc.

How To Use:
1) Warm up the oil by running the engine-This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can't hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit

2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube

3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required

4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot